An inexpensive solution for increasing draft beer profits – use this information to evaluate the operations of your draft beer dispensing system. A long draw remote draft beer system should meet or exceed the requirements described below. If the systems fails to meet these standards, your draft beer profitability and quality of beer served may be at risk. Contact your Micro Matic representative to learn more.
Cold beer sells and dispenses better, set the beer storage cooler temperature between 34 and 38˚ F. Confirm the glycol cooling unit’s bath is maintaining a temperature of 29˚ to 32˚ F and no ice is present in the bath. Verify the pump is operating and circulating the coolant mixture. This is indicated by the beer faucets feeling cold to the touch before beer is poured through them.
The trunkline (tubing bundle) that transports and maintains the beer temperature from the cooler to the dispense point should be insulated and free from tears or rips in the insulation. This protects the beer tubing and assures the beer in the trunkline stays cold.
A secondary regulator should be in place for each brand of beer on tap. This regulator is used to set the proper gas pressure to propel the beer through the system, and to maintain the brewery specified carbonation of each brand of beer on tap.
A gas blender, providing a blend of CO2 and nitrogen gasses, should be used on all long draw beer systems (>15 feet of tubing between the keg and faucet). The blended gas is used to keep the beer properly carbonated, reducing foam and waste, at the higher gas pressures required to push the beer through the longer system. A gas blender should also be used with Guinness and other nitrogenous beers that require unique gas blends and pressures as specified by the Brewers Association.
Clean a beer system every two weeks (minimum) with the proper process, chemicals, and equipment. Recirculation cleaning utilizing a 3% caustic cleaning solution for at least 10 minutes is brewery recommended.
Clean, beer-friendly glasses are essential for a great glass of beer. Clean glasses enable beer to retain its foam (head) while it is being consumed. Glass washing utilizing a proper cleaner, equipment and process will present the best glass of beer to the customer and reap the best profits. Rinse the inside of a frosted glass prior to dispensing to remove any ice crystals. The ice crystals on the inside of the glass can cause excessive foaming and harbor off taste and odors.
Use stainless steel components for all beer contact points (faucet, coupler, and fittings). Brass fittings break down with time and cleaning cycles thus impacting the quality of the beer.
Use clear vinyl tubing as jumper lines (the tubing from the coupler to the wall bracket in the walk-in). This provides a sight glass into the system to detect any build up in the beer tubing which could lead to off tastes or unsightly elements in the beer.
Use a Pro-Max™ (Profit Maximizer) on each beer line to significantly reduce beer waste during keg changes. Use beer tubing that is brewery flavor qualified and approved. Brewery approved Barrier Tubing is manufactured to protect the beer’s flavor and freshness and should be used in all long draw system.
Each and every beer dispensed should be easy to pour, with little or no waste. Expect the profit from every keg to be consistent. Bartender and server education on pouring and serving a quality glass of draft beer must be mandatory.